Home‎ > ‎

USED CNC KNEE MILLS

ADVANCED MACHINERY RESOURCES, INC.
USED CNC MACHINERY FOR SALE
                                                                                                                          SCROLL DOWN PAGE

USED CNC KNEE MILLS

                 SHIZUOKA 3 AXIS AN-S CNC KNEE MILL with CENTROID




                            
                            
                   
                                          

SHIZUOKA 3 AXIS CNC with CENTROID  $ 13,900

This is a nice Used 3 Axis Shizuoka CNC Milling Machine Retrofitted with the Centroid CNC Control.  The Shizuoka features the extra generous long Y Travel.  The machine has had the X axis ballscrew reconditioned, new X axis gib and new duplex bearings on the X and Y axis to maximize its accuracy.  It is running and making good parts.  It has a custom table guard , and tool holders to get you machining quickly.  The machine can run 220V single phase.  New computer upgrade and new hand jog pendant upgraded in 2012 so its running Lenux V 2.73.  Also includes Power Drawbar and Fully Programmable Speeds.


Shizuoka Machine Tool, Japan
Model: ANS
CNC Machine: Centroid Control 
Has newer hand jog pendant (see picture)
Machine has been completely converted to a current CNC control configuration from its original NC Tape configuration.
O/A Dimensions: 69" x 72" x 84"

Tooling Included !!!

Contact Jerry 503-998-0985, to schedule inspection, pickup, or purchase.


SPECIFCATIONS

Working surface 51" x 11"

T-slot 5/8" x 3" x 2.3/8" Center to Center

Longitudinal travel (X) 31"

Cross travel (Y) 17"

Ram travel (manual) 17"

Spindle quill travel (Z) 5-1/2"

Vertical table travel (manual knee) 17"

Spindle nose taper NMTB40

Spindle Speeds 85 - 3800 RPM (variable)

Spindle drive motor 3kW (4 HP)

Feed rates 0.2 - 120 ipm

Feed rapid traverse (X & Y) 200 ipm, (Z) 120 ipm

Buyer to verify all specifications and options of equipment prior to purchase.

       

                                                                                                                    SCROLL DOWN for MORE

                 SHIZUOKA 3 AXIS CNC KNEE MILL with CENTROID


   

                      

INCLUDES TOOLING !!!

SHIZUOKA 3 AXIS CNC with CENTROID  $ 10,900

Shizuoka Machine Tool, Japan
Model: ST-NCNC Machine: Centroid Controls, 5 years old. 
Has pendant (see picture)Machine has been completely converted to a current CNC control configuration from its original NC Tape configuration.
O/A Dimensions: 69" x 72" x 84"
Tooling Included:16 Small Tool Holders, 30 Taper, 3/8 - 3/4 inch range2 Large Tool Holders, 30 Taper, 1 inch range3 chucks in batch that take colletts
NOTE: The attached pictures show the CNC controls in working condition before being disconnected for storage.

SPECIFCATIONS


Working surface 51" x 11"

T-slot 5/8" x 3" x 2.3/8" Center to Center

Longitudinal travel (X) 31"

Cross travel (Y) 17"

Ram travel (manual) 17"

Spindle quill travel (Z) 5-1/2"

Vertical table travel (manual knee) 17"

Spindle nose taper NMTB40

Spindle Speeds 85 - 3800 RPM (variable)

Spindle drive motor 3kW (4 HP)

Feed rates 0.2 - 120 ipm

Feed rapid traverse (X & Y) 200 ipm, (Z) 120 ipm

Max Table Load 500lbs 

Weight approximately 5,500 lbs.

Brochure Specifications Subject to Buyer Verification


ALL USED EQUIPMENT SOLD " AS IS WHERE IS "


Contact Jerry 503-998-0985, to schedule inspection, pickup, or purchase.


                                                                                                                    SCROLL DOWN for MORE

                 BRIDGEPORT SERIES II CNC KNEE MILL with CENTROID












                       

Priced to Sell $ 13,900.00     SOLD

The industry classic coupled with the American made Centroid Control.  Super easy to program and cut cool parts with.  Treat yourself to an American legend. 

Machine Comes with some tooling !  
                                                                                                                   SCROLL DOWN for MORE

BRIDGEPORT SERIES II MACHINE SPECIFACTIONS

Travels X=30”, Y=15”, Z=5”

Knee Travel (manual) 16”

Throat Distance Rigid Ram 14-1/2”

Maximum Vertical Load 500 lbs.

Steel Way Covers on X Axis 

Overall Size 47 x 17

Working Surface 38 x 15

T-Slots 3 on 4-3/8” centers

T-Slot Size 5/8

Position Speed 120-190 IPM

Height Above Floor to Max 50”

SPINDLE

Motor Rating 2 HP

Taper #30 Quick Change

Speed Range 0-3600 RPM

Quill Diameter 3-3/8



                                                                                                                    SCROLL DOWN for MORE

SHARP 2-Axis CNC with ACU-RITE MILLPWR CONTROL

 






















Sharp 2 Axis CNC with MillPWR $ 8,900.00


This is a very nice Used Sharp QMV 2-Axis CNC with the Acu-Rite Millpwr Control. The control needs a new hard drive otherwise in very good condition.   The specifications are Table Surface 10" x 50" T-Slots, Size 3 at 5/8" X axis Travel 38" Y axis Travel 16.5" Z axis Travel (quill) 5.3" Ram Travel 19" Knee Travel 15.3" Throat Distance 4" to 30" Spindle Gaugeline to Table Top 2.3" to 17.7" Spindle Taper NST #40 Speed (Variable Speed) 60-4,500 RPM Quill Feed (IPR) 0.0015, 0.003, 0.005 Accuracy 0.0002" TIR Head Tilt (right - left) 90° Head Tilt (up - down) 45° Motor 5 HP, 220/440V, 3 phase, 60 Hz Dimensions 84"x75"x91" Weight (approx.) 3,200 lbs. 


For More Information Call Jerry @ 503-998-0985


Jerry@cncbyamr.com